The ASUS RT-AC88U is a pretty awesome router. However, out of the box, it’s a bit finicky if you try to print to it via WiFi or Apple’s AirPrint. It doesn’t seem to want to maintain the connection. I stumbled across this somewhat cryptic post and the suggested changes have solved my issues–at least so far. Here are the steps with a little more detail:
1. First log into the router’s settings.
2. Choose Wireless > Professional tab
3. Make the following changes:
-Modulation Scheme: Up to MCS 9 (802.11ac)
-Airtime Fairness: Disable (NOTE: According to one reader, this is the only change that matters, so try this first. Thanks Dan CC!)
-Multi-User MIMO: Disable (Note that this was already disabled by default for me)
-Explicit Beamforming: Disable
-Universal Beamforming (5 GHz only): Disable
Click Apply button.
4. Each of the Bands (i.e., 2.4GHz and 5GHz) have their own independent set of settings on this page. So, change the Band and repeat Step 3.
5. Finally, change the Control Channel to a specific channel (i.e., something other than Auto). Again, apply the change for one band, change the Band setting, and apply the change for the other band. (NOTE: as hellojohnbuck points out in the comments, printers generally only use 2.4GHz, so you probably only need to change for that band.)
I’m not sure what real-world impact changing these settings has on the router’s performance; however, I haven’t really noticed any significant difference…other than my printer works wireless now ;-)
NOTES:
Matt S commented below that he disabled a new setting, “Target Wake Time” (Wifi > General), that was causing his printer connection to timeout.
If you found this information helpful, please considering donating to help me keep this blog alive. Any amount would be appreciated. Thanks!
Finding this post was an absolute sanity saver, I’ve been pulling my hair our for several days trying to solve my ‘unable to AirPrint’ issue with my Epson ET-2870 and this has solved the problem. One thing I did note though was that for the 2.4gHz connection I used ‘up to MCS 7 (802.11n) as I didn’t have the option as shown above
WOW thank you thank you thank you! My family was going nuts for weeks dealing with printer sometimes showing and other times not, with no apparent reasoning. This fixed it right up
You’re welcome. Glad the fam is happy!
thank you so much! i’ve been spinning my wheels for hours trying to find the router setting on this exact router to make my printer discoverable by other devices. this worked!!
works！thank you
That worked! Thank you. After trying so many things with smart connect and what not